Filter
Top Products
0-6-2-5-9-6-MENU Do not allow the display to time out between entries while
keying the sequence.
6. Use the MENU UP/DOWN keys to highlight the GEOMETRY sub menu.
7. Press the MENU LEFT/RIGHT keys to enter the GEOMETRY sub menu.
8. Use the MENU UP/DOWN keys to highlight either the HORIZONTAL sub menu
or the VERTICAL sub menu.
9. Press the MENU LEFT/RIGHT keys to enter either the HORIZONTAL sub menu
or the VERTICAL sub menu.
10.Use the MENU UP/DOWN keys to select items in the HORIZONTAL sub menu
or the VERTICAL sub menu.
11.Use the MENU LEFT/RIGHT keys to adjust the values of items in the
HORIZONTAL and VERTICAL sub menus.
12.When all desired changes to the HORIZONTAL and VERTICAL sub menu
values are made, press the MENU button twice to return to the top level SDAM
menu.
13.To ensure the GEOMETRY settings are saved: Turn the television set OFF by
using the POWER button on the remote control transmitter or the local
keyboard. Disconnect the television set from AC power for at least ten seconds.
Reconnect the television set to AC power. Turn the television set ON by using
the POWER button on the remote control transmitter or the local keyboard.
The following alignments can be performed in the GEOMETRY submenu:
Figure: Horizontal Menu