Filter
Top Products
4. Switch the ComPair interface OFF.
5. Switch the television set OFF (and remove theAC power).
6. Connect the ComPair interface cable betweenthe connector on the rear side of the
ComPair interface (marked"I2C") and the ComPair connector on the mono carrier
(Connector0267).
7. Plug the AC power adapter in the AC power outletand switch on the ComPair interface.
The green and red LEDs lightup together. The red LED turns off after approximately 1
second,while the green LED remains lit.
8. Start the ComPair program and read the "introduction" chapter.
Figure: ComPair Connection
How To Order
ComPair order codes:
z
ComPair InterfaceBox 4822 727 21631
z
CDR Interface board 3122 785 90200
z
TV cable 3122 785 90004
z
DVD cable 3122 785 90017
z
BETA CALIBRATION DISK 7104 099 93132
z
Extra Com Cable S83-940
z
AC Adapter T405-ND
Error Buffer
The error code buffer contains all errors detectedsince the last time the buffer was erased. The
Pa
g
e 12 of 16SPMS
7/8/2004