Filter
Top Products
Main panel with bracket.
1. Disconnectthe strain relief of the AC power cord.
2. Disconnect the degaussing coil by removing thecable from (red) connector 0201 [1].
3. Remove the panel bracket from the bottom tray,by pulling it backward [2] and turn the
chassistray 90 degrees counter clockwise.
4. Move the panel somewhat to the left and flipit 90 degrees [3], with the components
towardsthe CRT.
5. Turn the panel with the rear I/O towardsthe CRT.
6. Place the hook of the tray in the fixation holeof the cabinet bottom [4] and secure it.
Pa
g
e 3 of 7SPMS
7/8/2004