Philips DVDR75 DVD Player User Manual


 
20 Quick Disc Playback
1
Press STANDBY
yy
to turn on the DVD Recorder.
Turn on your TV. Set it to the correct Video In channel. See pages 9-
14. You should see the blue Philips DVD background picture on the TV
screen (if no Disc is in the Recorder).
2
Press OPEN/CLOSE A on the front of the Recorder to open the disc
tray.
Load your Disc in the tray, with the label facing up and the shiny side
facing down. If the Disc (DVD) is two-sided, make sure the label of the side
you want to play is facing up.
3
Press OPEN/CLOSE A again to close the tray.
4
Play may start automatically. If not:
• If you are playing a DVD, a Disc menu may appear. If the Title or Chapter
selections are numbered, press a Number button to select an item. Or,
press CH+8, CH-9, ;,or : to select an item, then press OK. Continue
until you start playing the Disc. Or, follow the instructions in the DVD Disc
menu.
• If you are playing an Audio CD, press PLAY : to start playback.
• If you are playing a DVD+RW/DVD+R, the Index Picture Screen will
appear. See page 32. Press CH+8 or CH- 9 to select the Title you want to
play, then press OK. If the Disc is blank, the display will show “EMPTY
DISC.”
5
To stop play at any time, press STOP C.
If Auto resume is On, DVD play will resume at the same point the next
time you play the DVD.To play the DVD from its beginning, restart play
from the DVD’s Disc menu.
If Auto resume is Off, Resume will appear in the top left corner when
you play the DVD later.While Resume appears, press PLAY : to
resume play from the point at which you last stopped it. Otherwise, play
will start at the beginning of the DVD. Resume will disappear after
about 15 seconds.
Auto resume is On when you purchase the Recorder. However, you can
turn it On or Off. See page 53.
If the Disc is Locked by Access
Control, you must enter the four-
digit code or unlock the Disc. See
pages 54-58.
DVDs have a region code.Your
Recorder will not play Discs that
have a region code other than 1
(one). See page seven.
Auto resume does not affect
Audio CDs. If you restart play of
an Audio CD, play starts at the
beginning of the Audio CD.
Helpful Hints
OPEN
STANDBY-ON
OPEN/CLOSE
1
2
3
4
5
6
7
8
0
9
I
I
MONITOR
TV / DVD
T / C PLAY MODE
REC. MODE
SELECT
OK
DISC
SYSTEM
MENU
CH
CH
TIMER
FSS
RETURN
CLEAR
TV VOLUME
PLAY
STOP
AUDIO
PAUSE
REC/OTR
STANDBY
POW
ER ON/OFF
4
1
5
2-3