Philips DVDR75 DVD Player User Manual


 
42 Timer Recording
1
2
3
4
5
6
7
8
0
9
I
I
MONITOR
TV / DVD
T / C PLAY MODE REC. MODE
SELECT
OK
DISC
SYSTEM
MENU
CH
CH
TIMER
FSS
RETURN
CLEAR
TV VOLUME
PLAY
STOP
AUDIO
PAUSE
REC/OTR
STANDBY
1
Press TIMER.
2
Press CH-9 to select Timer Programming, then press :.
3
Date will be selected. Press CH+8 or CH-9 to enter the month and
date you want the recording to start.
Press SELECT repeatedly to choose: the date (timer recording will
occur once on the day you choose); Mo-Fr (timer recording will occur every
weekday at the same time); or a day of the week (for example, Mo for
Monday; timer recording will occur every Monday at the same time). When
the date is correct, press :.
4
Ch. (channel) will be selected. Press CH+8 or CH-9 to enter the chan-
nel you want to record, then press :.
If you are using a Cable Box/Satellite Receiver, enter channel 3 or 4 (the out-
put channel of your Cable Box/Satellite Receiver) or the EXT channel (that
corresponds to the jacks to which you connected the Cable Box/Satellite
Receiver). Set the channel you want to record at the Cable Box/Satellite
Receiver. Leave it on for the recording.
5
Start will be selected. Press CH+8 or CH-9 to enter the time at
which you want recording to begin - in hours and minutes.
Press SELECT repeatedly to choose AM or PM.
When the Start time is correct, press :.
6
End will be selected. Press CH+8 or CH-9 to enter the time at which
you want recording to stop. Press SELECT repeatedly to choose
AM or PM.When the End time is correct, press :.
7
Rec Mode (Record Mode) will be selected. Press CH+8 or CH-9 to
choose a recording speed: M1, M2, M2x, M3, M4, or M6.
See page 49.
8
Check your timer information. If something is incorrect, press ; or : to
choose the incorrect data. Use CH+8 or CH-9 to enter the correct data.
9
When the information is correct, press OK. Stored will appear at the
bottom of the screen, then the Timer menu will reappear.“Switch off; timer
recording” will be highlighted in red at the bottom of the screen.This is a
reminder to turn off the DVD Recorder so the recording can occur.
10
Press TIMER to remove the menu.
11
Put a recordable DVD+RW or DVD+R in the Recorder. Press
STANDBY
yy
to turn off the Recorder. For the timer recording, the
Recorder will turn itself on, record, then turn itself off when finished.A red
light will encircle the Record I button on the Recorder during recording.
If you plan to play a DVD+R on another DVD Player, finalize the Disc. Follow the
steps on page 52.
You can enter the Date, Channel,
Start, and End information with
the Number buttons. Enter chan-
nel numbers as a three-digit
number. For example, for channel
15, press 0,1,5.
Press STANDBY y on the
remote to turn off the Recorder
and stop a timer recording that is
in progress.
You cannot select Timer
Programming if six recordings are
set. Delete a recording, then set a
new one. See page 44.
Set a Timer recording and turn
off the Recorder five minutes
before the recording will start.
Set the timer recording one
minute ahead of the program’s
start time.This helps ensure the
entire program is recorded.The
Disc needs about 30 seconds to
prepare for recording.
You cannot change channels dur-
ing recording.
To edit your recordings, see page
51. Editing changes may not be
accessible when you play the
Disc on other Players.
TIMER will appear on the display
panel if a Timer Recording is set.
Helpful Hints
Timer
K VCR Plus+ system
uBTimer Programming B
L
Timer List
To exit
Press TIMER
Timer
Timer Programming
Rec
Date Ch. Start End Mode
10/24 122 09:00AM 09:30AM M1
Mo-Fr/Weekly To store
Press SELECT Press OK
Timer
Timer Programming
Rec
Date Ch. Start End Mode
Mo-Fr 122 09:00AM 09:30AM M1
Mo-Fr/Weekly To store
Press SELECT Press OK
Timer
Timer Programming
Rec
Date Ch. Start End Mode
Th 122 09:00AM 09:30AM M1
Mo-Fr/Weekly To store
Press SELECT Press OK
Press SELECT once.
Recording will happen one
time on the day you chose.
Press SELECT again.
Recording will happen every day,
Monday-Friday, starting on the
day you chose.
Press SELECT again.
Recording will happen on the same
day every week, starting the day you chose.
2-9
11
1,10