Pioneer DVL-V888 DVD Player User Manual


 
21
Karaoke OperationDetailed Operation Setting Set Up Other Information
Basic Operation
LASER DBC
MENU
ENTER
A / B
A–B
OPEN/
CLOSE
POWER
AUDIO
SUBTITLE
ANGLE
DISPLAY
RETURN
LAST
MEMORY
TITLE
PREV
REV FWD
CLEAR
PLAY
CONDITION
KEY CONTROL
PROGRAM
MODE
PAUSE
CHP/TIME
GUIDE
VOCAL
MELODY
VOCAL
PARTNER
REPEATREPEATSTOP
NEXT
PLAYBACK
CONTROL
DISC SIDE
LD-G CD-G
LaserDisk
Press
POWER
.
The STANDBY indicator goes out.
Press the
OPEN/
CLOSE
.
The disc table comes out.
Load a CD graphics disc.
Load a disc with the label side facing up,
using the disc table guide to align the disc.
Press
PLAY
button.
Playback starts.
Even if the graphics mode is switched
OFF, when you play a CD graphics disc,
the graphics mode is automatically
switched ON, and graphics are displayed.
5
Playing Back CD
Graphics
Video and audio information is recorded in different areas on a
disc. There's also a subcode area where information such as sub-
titles and song lyrics can be recorded. Graphics refers to the read-
ing of the signals in this area, and their display.
CD graphics discs bear the
GRAPHICS
mark. You can enjoy graph-
ics when playing discs bearing this mark.
Notes
There should be graphics but....
If you play CD graphics discs with the graphics mode
switched ON, and still no graphics are displayed, the
problem could be due to inappropriate graphics
channel setting, or because the graphics display is in
the wrong position on the screen. Refer to pages 46
and 47.
When playing a disc with no graphics recorded on it,
in rare cases erroneous graphics may be displayed,
but this does not mean the player is malfunctioning.
When playing discs without recorded graphics, be sure
to switch the graphics mode OFF.
During playback of CD graphics discs, performing the following
operations may result in missing subtitles and picture and
subtitle color changes, but this is not a malfunction. Wait a
little, and normal graphics display resumes.
Fast forward/reverse
Pause, Search
Switching graphics ON on the graphics control display
Displaying a menu
Tip
Press
SUBTITLE
.
The mode changes as follows.
Switching graphics ON
Trust me!
3
Playing Back CD Graphics
POWER button
PLAY 3 button
OPEN/CLOSE 0 button
= OFF = ON
Switching graphics OFF
When graphics is ON, press
SUBTITLE
.
4