Filter
Top Products
68
S video
cable
Supplied
audio cord
S2
IN
CONTROL
OUT
White
Yellow
VIDEO
IN
AUDIO
IN
L
R
Supplied video cord
Cord with mini plugs (no resitance)
AV amplifier
Red
V
LR
L
R
V
Yellow
White
Red
Connect either
one of these.
By connecting to a regular AV
amp or stereo amp, you can
enjoy playback with improved
sound quality.
Connection example 3.
AV amplifier
¶ Connect this player’s audio output jacks to an amp’s CD, LD, AUX or other audio input jacks. (Do not connect to PHONO jacks.)
¶ Connect this player’s video output jack to the amplifier’s or receiver's video input jack.
¶ When connecting to a digital output, refer to page 70.
indicates the use of separately sold cords.
Note
¶ When connecting to a component bearing the Pioneer Î mark.
If you use a commercially available cord with mini plugs (no resistance) to connect this player’s control input jack to the control
output jack of the component bearing the Î mark, you can control the player as though it were a component in a system
(system control).
¶ If you connect for system control, you cannot operate the player directly by pointing the remote control at it and pressing
buttons.
¶ When controlling the unit as part of a system, be sure to connect to the amplifier with audio cord even if you are using only
digital components.(System control is not possible if you connect using only cables with mini plugs.)
¶ If your AV amplifier is a Dolby Pro Logic decoder, you can enjoy surround sound.
¶ For more details, refer to the connected component’s operating instructions.
When connecting to a digital output, refer to page 70.
Connecting the Player