Filter
Top Products
46
MENU
ENTER
A–B
RETURN
LAST
MEMORY
TITLE
PREV
REV FWD
CLEAR
PLAYPAUSE
CHP/TIME
REPEATREPEATSTOP
NEXT
PLAYBA
C
K
CONTROL
Changing graphics display position
Changing Picture, Sound Quality and Graphics Settings
Changing graphics settings
Video and audio information is recorded in different areas on a disc.
There's also a subcode area where information such as subtitles
and song lyrics can be recorded. Graphics refers to the reading of
the signals in this area, and their display.
You can set the graphics channel (between 0 and 15) to select the
desired information for display, and set the Scroll setting (from
Normal to Step 17) to select the on-screen position of graphics
indications.
Changing graphics display position
During play, press
MODE
and select
GRAPHICS.
2
Select ON with the buttons .
3
Press
ENTER
.
Scroll flashes.
To return to the previous display, press
RETURN
on the remote control.
Tip
If graphics are not displayed even if you perform these operations,
try changing the channel (refer to page 47).
Note
4
Press
ENTER
.
5
Select display position with the
buttons.
¶ You can select from 18
positions between Normal and
Step 17.
¶ To return to the normal display
position, press
CLEAR
.
Press ENTER.
Graphics are displayed in the
selected position.
MENU
ENTER
AB
RETURN
LAST
MEMORY
TITLE
PREV
REV FWDPLAYPAUSE
CHP/TIME
REPEATREPEATSTOP
NEXT
PLAYBACK
CONTROL
LASER DBC
CONDITION
KEY CONTROL
PROGRAM
MODE
GUIDE
VOCAL
MELODY
VOCAL
PARTNER
GRAPHICS
ON OFF
GRAPHICS
ON OFF
MENU
ENTER
A / B
AUDIO
SUBTITLE
ANGLE
DISPLAY
RETURN
LAST
MEMORY
TITLE
PREV
REV FWDPLAYPAUSE
CHP/TIME
REPEATREPEATSTOP
NEXT
PLAYBACK
CONTROL
DISC
SIDE
GRAPHICS
SCROLL
CHANNEL
MENU
ENTER
A–B
AUDIO
SUBTITLE
ANGLE
DISPLAY
RETURN
LAST
MEMORY
TITLE
PREV
REV FWDPLAYPAUSE
CHP/TIME
REPEATREPEATSTOP
NEXT
PLAYBACK
CONTROL
GRAPHICS
SCROLL NORMAL
MENU
ENTER
RETURN
MEMORY
TITLE
PREV
REV FWDPLAYPAUSE
NEXT
CONTROL
GRAPHICS
SCROLL STEP1