Pioneer DVR-5100H DVR User Manual


 
Getting started
04
36
En
Note
When using the simultaneous play and record
feature, the display shows information for playback
only.
During real-time copy, the copy source playback
information is displayed.
If
Frame Search
is
On
(see
Frame Search
on
page 106), the frame number is shown next to the
elapsed time display when the disc is paused.
Transfer rate shows the amount of video and audio
information recorded on the disc. It is not an
indication of picture/audio quality.
The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
The total recording time figure shown in parenthesis
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.
Copy Once
or
Can’t Record
messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
DVR-03_HDD_EU.book 36 ページ 2003年9月16日 火曜日 午後12時23分