Filter
Top Products
Copying and back-up
07
71
En
English
5 Select ‘Next’ to proceed to the copy settings
screen.
6 Use the
/
(cursor left/right) buttons to select
the recording quality.
•
High-Speed Copy
– Only available when copying
Original content to a VR mode disc. The Copy List is
copied at the same recording quality as the original.
(See page 62 for more information on high-speed
copying.)
•
FINE
,
SP
,
LP
,
EP
,
MN
– The Copy List is copied at the
specified recording quality in real-time. (Note that if
you copy at a higher quality setting than the original,
the copy will not be better quality than the original.)
• If you select
MN
above, you can also change the level
setting (
MN1
–
MN32
) from the Recording Quality box
that appears.
When you change the recording quality setting, you can
see how much hard disk space it will require. If this is
more than is available, it shows up in red and you won’t
be able to start copying. In this case, either change the
recording quality, or press
RETURN
to go back to the
Copy List screen and erase one or more titles from the
Copy List.
7 Select ‘Start’ to begin copying.
Add
Use this command to add one or more titles to the Copy
List.
1 Select ‘Add’ from the Copy List menu options.
2 Use the
/
(cursor left/right) buttons to select
a title from the DVD to add to the Copy List, then
press ENTER.
The thumbnail appears in the Copy List section in the
lower half of the screen.
• You can’t add titles which would make the total
running time of the Copy List more than 6 hours.
3 Repeat step 2 to add more titles to the Copy List,
or press RETURN to go back to the Copy List menu
options.
Note
• Titles which were recorded directly to a VR mode disc
or have already been copied real-time, and which
contain bilingual audio or are recorded in recording
modes
MN12
–
MN20
can be added to the Copy List,
however if
High-Speed Copy
is selected they will not
actually be copied.
• Similarly, a copy-once protected title, recorded from
the TV for example, can be added to the Copy List, but
it will not be copied if
High-Speed Copy
is selected.
Move
Use this command to change the order of titles currently
in the Copy List.
1 Select ‘Move’ from the Copy List menu options.
2 Use the
/
(cursor left/right) buttons to select
a title from the Copy List to move, then press ENTER.
DVD
SP
Start
DVD HDD
Required 1h30m
Recording Mode
Copy List Total
Current HDD Remain
1h30m
30h00m
/ 34h00m
Next
Original
DVD to HDD Copy
Add
Erase
Move
Preview
Erase All
Play List
Next
DVD
DVD to HDD Copy
Add
Erase
Move
Preview
Erase All
DVD
DVD
HDD
HDD
1
1/3
1/2Copy List
16:00 Sun11/08
Pr 5 LP
Total 1h30m
2 3 4
1 2 3 4
Play List
Next
DVD
DVD to HDD Copy
Add
Erase
Move
Preview
Erase All
DVD
DVD
HDD
HDD
1
1/3
1/2Copy List
15:00 Wed
7/10
Pr 5 LP
Total 1h30m
2 3 4
1 2 3 4
DVR-03_HDD_EU.book 71 ページ ２００３年９月１６日 火曜日 午後１２時２３分