Filter
Top Products
Additional information
15
132
En
Setting up the remote to
control your TV
You can use the supplied remote to control
your TV. To be able to use this feature you
first have to program the remote with a
maker code from the table below.
1 Press and hold down the CLEAR
button, then enter the maker code for
your TV.
The LED indicator on the remote controls
lights.
See the table below for the list of maker
codes. If there is more than one code given
for your make, input the first one in the list.
• If the maker’s name of your TV doesn’t
appear in the table below, you will not be
able to use this remote to control your
TV.
2 Press TV to check that the remote
works with your TV.
If the remote is set up correctly, the TV
should switch on/off. If it doesn’t and there is
another code given for your maker, repeat
step 1 with a new code.
Using the TV remote control
buttons
The table below shows how to use this
remote control with your TV.
Button What it does
TV Press to switch the TV on/
off (standby)
INPUT SELECT Press to change the TV’s
video input
TV VOLUME Use to adjust the TV
volume
TV CHANNEL Use to change TV channels
Maker Code
Alba 66
Bush 76
Fisher 61, 65
Fujitsu 77
Funai 67
Goldstar 79
Grandiente 87
Grundig 51, 82
Hitachi 56, 60, 83, 86
ITT 70
Mitsubishi 59
Nokia 53, 81
Panasonic 58, 72
Philips 57, 85, 89
Pioneer 50, 80
RCA 68
Salora 71
Samsung 73, 75
Sanyo 74
Sei 78
Sharp 52
Sony 54
Tandy 69
Telefunken 64
Thomson 62, 89
Tos hib a 55
JVC 63
DVRLX70_TF_EN.book 132 ページ ２００７年８月１日 水曜日 午後４時１４分