Filter
Top Products
Getting started
31
En
04
7 Select the TV screen type,
‘Wide (16:9)’ or ‘Standard (4:3)’.
8 Select whether or not your TV
is compatible with progressive scan
video.
9 Set the HDMI output (only
when an HDMI component is connected).
• Depending on the HDMI component you
have connected, the above screen may
not appear.
• Select Yes if you want this unit to
automatically set the optimum setting
for the device connected to the HDMI
terminal.
• There are cases where nothing appears
on the screen after the automatic setup
due to an HDMI cable, etc. If you do not
perform any operations in this case, this
unit returns to the previous setting in
30 seconds.
• Select No if you want to make this
setting later.
10 Press to continue after reading
the HDD caution.
11 Select ‘Finish Setup’ to exit
the Setup Navigator, or ‘Go Back’ if you
want to start again.
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See Manual
CH Setting on page 109.
ENTER
k
Setting
t
Line System
e
r Save
P
p Navigator
p Navigator
TV Screen Size
Wide (16:9)
Standard (4:3)
ENTER
k
Setting
t
Line System
e
r Save
P
p
Navigator
p
Navigator
Progressive
Compatible
Not Compatible
Don't Know
Not Compatible
ENTER
k
Setting
Line System
e
r Save
P
p
Navigator
p
Navigator
HDMI Setting
Yes
No
Set to the transmission mode optimized for
the connected device?
* Under this setting, nothing may appear
on the screen due to HDMI cables, etc.
The mode returns to the current setting
after 30 seconds.
ENTER
k
Setting
t
Line System
e
r Save
P
p
Navigator
p
Navigator
In the event of HDD failure, recordings may
be lost or normal playback/recording may
not be possible.
As recordings might be lost in case of a HDD
failure, we recommend to use the HDD only
as temporary storage media.
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
k
Setting
t
Line System
e
r Save
p
Navigator
p
Navigator
Setup is complete!
Finish Setup
Go Back
Finish Setup
04 Getting_Started.fm 31 ページ ２００７年９月１１日 火曜日 午前１１時２分