Filter
Top Products
Recording
45
En
05
5 Select ‘Store Programme’.
6 Press to exit the Timer Recording
screen.
Stopping a timer recording
1 Press during a timer recording.
2 Select ‘Yes’ to confirm.
Preventing use of the recorder
before a timer recording (child
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCKED. If any buttons are pressed on the
remote or front panel, LOCKED is briefly
displayed again.
• To unlock the recorder, press and hold
(Stop) on the front panel (while the
recorder is stopped) for three seconds
until the display shows UNLOCKED.
• Even if you make child lock settings, this
unit can still be controlled by the remote
of a connected plasma television. If you
do not want this unit to be able to be
controlled by another component when
you have set a child lock, turn this unit’s
HDMI Control to OFF (page 117).
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder
doesn’t start recording!
Check that the disc loaded or HDD is
recordable, not locked (see Lock Disc on
page 102), and that there are fewer than
99/999 titles already on the DVD/HDD.
• The recorder won’t let me enter a timer
programme! Why not?
You can’t enter a timer programme if the
clock isn’t set.
• What happens when two or more timer
programmes overlap?
Basically, the programme with the earlier
recording start time has priority.
However, the recorder will start
recording the programme with the later
start time after the earlier programme is
finished. If schedule to record two
programmes have the same times (but
different channels, for example), then
only one of the two programmes will be
recorded. In this event you should cancel
the scheduled recording of the lesser
important programme. If one of the
overlapping programmes is a regular
timer programme, you may choose
‘Cancel Once’
in order to avoid having it
overlap with a separately scheduled
programme (see
Skipping a regular timer
programme
on page 44).
ENTER
HOME
MENU
STOP RE
C
ENTER
STANDBY/ON
DVRLX70_TF_EN.book 45 ページ ２００７年８月１日 水曜日 午後４時１４分