Filter
Top Products
Connections & Setup
18 Chapter 1
Complete the Assisted Setup
If you installed your satellite dish antenna yourself, you may have already used the Assisted
Setup to find dish-pointing coordinates, acquire and fine-tune the signal, and run a system test.
If you need to run the setup again, select System Setup from the Main menu, then select Assisted
Setup.
To check your dish-pointing coordinates or run the signal strength meter, display the Main
menu, then select System Setup, and finally Dish Pointing.
Order Programming
After you have installed your DIRECTV System, you should contact DIRECTV to
order DIRECTV
®
programming.
With this receiver and the proper satellite dish antenna, you may be able to
subscribe to local channels from DIRECTV in certain areas. Additional
equipment may be required in some markets. Check with your retailer or visit
DIRECTV.com for information on availability of local channels from DIRECTV in
your area.
Activation of programming may be subject to credit approval and requires valid
service address, social security number and/or major credit card. Programming
subject to change. You must be physically located in the U.S. to receive DIRECTV
service. DIRECTV services not available outside the U.S. DIRECTV
®
programming
is sold separately and independently of DIRECTV System hardware. A valid
programming subscription is required to operate DIRECTV System hardware.
Activate your DIRECTV
®
programming today at 1-800-DIRECTV (1-800-347-3288).
Tip
When you order programming, you
need to know your access card
number. To get the number, select
System Setup from the Main menu,
then System Test.
Wait for the system to run all of its
tests. The access card number is
displayed at the end of the system
test.
Write the access card number in the
space below for easy reference: