Filter
Top Products
11
Overview
The RR-1060 is a universal learning remote con-
trol that can operate all of the components in your
audio/video system. Control codes for Rotel com-
ponents are already programmed. You can easily
customize the RR-1060 to operate other compo-
nents by selecting command sets for hundreds of
components from the RR-1060’s extensive data-
base. See the Programming section of this manu-
al for easy to follow instructions. For components
not in the database or for additional commands,
you can teach the RR-1060 commands using your
existing remotes. See the Learning section of this
manual for easy to follow instructions.
Once the programming is complete, select a
component with the press of a button to turn
the RR-1060 into the remote control for your CD
player, TV, or VCR.
Here is the layout of the RR-1060:
IR Emitter/Sensor
The IR Emitter/Sensor is located in the top edge of
the RR-1060. It sends the IR commands and must
be pointed at the desired component. It also re-
ceives IR codes from your other remotes during
the LEARNING process.
LCD Display
The LCD DISPLAY provides status information in-
cluding the device currently selected and a cus-
tomizeable label for each button as it is pressed.
The eight character alphanumeric display also
provides simple prompts when programming the
RR-1060. These indicators and prompts are noted
in the appropriate sections of this manual.
Light Button
The RR-1060 provides automatic backlighting in
a dim room. The backlighting turns on whenev-
er a button is pressed, including the LIGHT but-
ton on the side of the remote. The backlighting
stays on for about 5 seconds each time a button
is pressed.
NOTE: In a bright room, the backlighting function
is disabled to save battery power.