Filter
Top Products
17
Programming
The RR-1060 contains hundreds of command sets
for components. Programming the remote involves
selecting the command sets that correspond to
the components in your system and assigning
each of them to one of the nine DEVICE buttons
by entering the 4-digit code for that component.
This need only be done once during initial setup
of the RR-1060.
There are four ways of finding the correct 4-digit
code. The easiest way to program Rotel compo-
nents is to search by the model number. For other
components, you can search the database by the
brand name of your component. A third option
is to try the codes available for your brand from
the list of 4-digit codes. Finally, you can search
the database for ALL codes, until you find one
that works.
NOTE: Programming the RR-1060 is done in a
menu-driven setup mode accessed by pressing
the SETUP button, then using the UP/DOWN and
+/– cursor keys to navigate menus, and pressing
the ENT button to confirm selections. At any time
during the process, you can exit the setup mode
and return to normal operation by pressing the
SETUP button.
Programming Rotel components
by Model Search
You can find the correct 4-digit code for Rotel
components by searching the database for the
model number of your Rotel Audio, DVD, or CD
component.
When using the model search,
the DEVICE/IN-
PUT buttons can only be programmed for specific
types of components as follows:
AUD: Audio components only
CD: CD players only
TUN: Audio, DVD, CD only
TAPE: Audio, DVD, CD only
V1: DVD only
V2: Audio, DVD, CD only
V3: Audio, DVD, CD only
V4: Audio, DVD, CD only
V5: Audio, DVD, CD only