Filter
Top Products
18 RR-1060
1. Press the DEVICE/INPUT button where you
wish to program this component’s code (AUD,
CD, TUN, TAPE and V1–V5).
2. Press the SETUP button (the LCD displays SET-
UP). Press the ENT button to confirm.
3. Press the UP/DOWN cursor buttons until SET
-
UP MODEL appears in the display. Press the
ENT button to confirm.
4. Press the UP/DOWN cursor buttons until the
type of component you are searching for ap
-
pears in the display (AUD, DVD, CD) Press
the ENT button to confirm. The first available
model number appears in the display.
5. Use the UP/DOWN cursor buttons to scroll
through the list until the desired model number
appears. Press ENT to confirm the selection.
6. Press any COMMAND button to test the new
code. For example, when programming a CD
player, you could push the PLAY button to see
if the disc begins play. If the command works,
press ENT to save the the code selection and
return to normal operation.
NOTE: You can press the SETUP button to exit the
programming at any time.
Programming
by Brand Name
You can also use the following search method
to find and test the code numbers available for
your brand of component. When using the brand
search,
the DEVICE/INPUT buttons can only be
programmed for specific types of components
as follows:
AUD: Rotel audio components only
CD: CD players only
TUN: Any component
TAPE: Any component
V1: DVD only
V2: Any component
V3: Any component
V4: Any component
V5: Any component