Filter
Top Products
13
EXT Button
The EXT button is a special input selection button
for Rotel audio/video receivers or surround sound
processors. It is used to select the multi-channel
analog inputs when playing SACD or DVD-A discs.
This bypasses the digital/analog processing in the
receiver or surround sound processor.
Press and hold the EXT button for more than one
second to select the multi-channel analog input on
a Rotel A/V receiver. The EXT button contains a
duplicate of the remote commands programmed
in the V1 device. Therefore, you cannot program
or learn command codes for the EXT button.
The V1 button should be used for Rotel or other
DVD players, allowing you to select the normal
input with the V1 button or the multichannel ana-
log input with the EXT button. Both DEVICE/INPUT
buttons contain the same remote codes.
Basic Command Buttons
This large group of buttons duplicates the func-
tions on the remote controls for your audio/video
components. Each button can store commands
for nine different components, selected by press-
ing one of the DEVICE/INPUT buttons (AUD, CD,
TUN, TAPE and V1–V5).
When using the RR-1060, first press the DEVICE/
INPUT button for the desired component. Then,
press COMMAND buttons to send the commands
learned for that component.
At the top right of this group are basic command
buttons such as Power On and Off, Volume, Chan-
nel Selection and Muting. The Smart Macro but-
ton is also in this group. See the Smart Macro
Programming section of this manual for more
information.
At the top left of this group are twelve numeric
keypad buttons that are used to make direct track
selections on a CD or DVD player or direct chan-
nel selections on a TV, cable decoder, satellite
receiver, etc.