Filter
Top Products
29
5. Press the COMMAND button that you wish
to relabel. The current label appears on the
second line of the display.
6. Press the +/– buttons to select a character to
change and the UP/DOWN cursor buttons to
change the letter. The “Character Map” illus-
tration shows the available characters. Labels
can be a maximum of 8 characters.
7. When the new label is complete, press the
SETUP button to save the new label.
8. A confirmation message appears in the LCD.
Use the UP/DOWN buttons to select either
YES (to confirm the new label) or NO (to exit
without making any changes). Press the ENT
button to confirm the selection.
Changing Smart Macro labels
To change the label for a Smart Macro:
1. Press the SETUP button.
2. Press the UP/DOWN cursor buttons until
SMART appears in the display. Press the ENT
button to confirm.
3. Press the UP/DOWN cursor buttons until
SMART RENAME appears in the display.
Press the ENT button to confirm.
4. Press the Smart Macro button that you wish
to relabel. The current label appears on the
second line of the display. If the button does
not have a Smart Macro programmed, the
word EMPTY appears in the display.
5. Press the +/– buttons to select a character to
change and the UP/DOWN cursor buttons to
change the letter. The “Character Map” illus-
tration shows the available characters. Labels
can be a maximum of 8 characters.
6. When the new label is complete, press the
SETUP button to save the new label.
7. A confirmation message appears in the LCD.
Use the UP/DOWN buttons to select either
YES (to confirm the new label) or NO (to exit
without making any changes). Press the ENT
button to confirm the selection.