Filter
Top Products
15
Operating the RR-1060
This section of the manual explains the basic
operation of the RR-1060 and most of its stan-
dard features.
NOTE: The AUD DEVICE/INPUT button of the
RR-1060 is pre-programmed with control codes
for Rotel A/V receivers or surround sound proces-
sors. The V1 button is pre-programmed to operate
Rotel DVD players. The CD button is pre-pro-
grammed to operate Rotel CD players.The other
DEVICE/INPUT buttons (TUN, TAPE and V2 – V5)
are unprogrammed. You must program or learn
commands for these DEVICE/INPUT buttons.
Sending IR Commands
Instead of putting down one remote and pick-
ing up another, you simply press a button on the
RR-1060 to convert it from the remote control for
your CD player to the remote control for your TV
set. Here’s how:
1. Press a DEVICE/INPUT button (for under one
second) to activate the command set for the
desired component. For example, press the
AUD button to control a Rotel surround pro-
cessor. The label for your selection appears
in the display. The selected command set re-
mains active until you press a different DE-
VICE/INPUT button.
2. Press a COMMAND button to send an IR com-
mand to the component you have selected.
For example, press the POWER ON button to
turn on a Rotel surround processor. The label
for the COMMAND button appears in the dis-
play. If the label “NO DATA” appears in the
display, the button has no learned command
for that DEVICE.
NOTE: The default labels that appear in the display
match the button labels. You can customize the
labels for every DEVICE/INPUT and COMMAND
button.
Remember that the COMMAND buttons duplicate
controls on many different types of audio/video
components. Their function depends on the type
of component selected. Make sure that you have
pressed the correct DEVICE/INPUT button and
use the button labels as guides.