Filter
Top Products
20 RR-1060
Programming
by 4-Digit Code
Find your audio/video component in the 4-digit
code list. Then proceed as follows:
1. Press the DEVICE/INPUT button where you
wish to program this component’s codes (AUD,
CD, TUN, TAPE and V1–V5).
2. Press the SETUP button (the LCD displays SET-
UP). Press the ENT button to confirm.
3. Press the UP/DOWN cursor buttons until SET-
UP CODE appears in the display. Press the
ENT button to confirm.
4. Input the 4-digit code using the 0–9 buttons.
Upon entering a valid code, the phrase CODE
OK will be shown. If the code is not valid, the
LCD will show CODE INVALID.
5. Once a valid code has been entered, test the
code by sending pressing any COMMAND
button. For example, when testing a DVD code,
you could press the PLAY button. If the code
works, skip to the next step. If the code does
not work properly, repeat the procedure from
step 4, using the next 4-digit code listed for
the brand of component.
6. Press the SETUP button to exit to programming
mode.