Filter
Top Products
• Forreplacement,youwillneeda5.91-Inchscrewdriverandapairofgloves.
Unplug the TV, then use a
screwdriver to remove the
screws.
Remove the Lamp cover.
Push the clip and pull down
the Lamp holder.
Separate the Lamp from the
engine by holding the handle
and pulling it out.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
English - 131