Filter
Top Products
Operation
Pressthe • or • button to select the
Antenna connection, then press the
ENTER Button.
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
Air+Cable : "Air" and "Cable"
antenna signals
When selecting Cable TV system:
Pressthe ENTER button to start the auto
program. By default, the cable TV system
is set to "STD".
If you want to select another type of
cable system, press the _1 button and
use the • or • button to select
"STD', "HRC" or "IRC'.
Pressthe ENTER button.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
Pressthe • button to select "Start", then
press the ENTER button to start the auto
program. The TV begins memorizing all
available stations. Pressthe ENTER button
at any time to interrupt the memorization
process.
Pressthe EXITbutton to exit.
The TV must Be connected to an
antenna in order to receive digital TV
signals. Even if a particular channel
is deleted from the memory, you can
always tune to that channel directly
by using the number buttons on the
remote control.
NOTE
• All available DTV and Analog channels are automatically stored
in memory.
English - 34