Filter
Top Products
Pressthe • or • button to memorize
the channels of the selected connection.
Pressthe ENTER button to select "Start".
• If the antenna is connected to ANT 1
IN (CABLE), select "Cable" and if it
is connected to ANT 2 IN (AIR),
select "Air".
• If both ANT 1 IN (CABLE)and ANT 2
IN (AIR) are connected, select the
"Air + Cable".
Pressthe ENTER button to start the auto
program. By default, the cable TV system
is set to "STD".
If you want to select another type of
cable system, press the _1 button and
use the • or • button to select
"STD", "HRC" or "IRC".
Pressthe ENTER button.
• STD, HRC, and IRC identify various
types of cable TV systems. Contact
your local cable company to identify
the type of cable system that exists in
your particular area. At this point the
signal source has been selected.
Selects the antenna to execute the
Auto Program function,
Air
Cable
Air+Cable
Selects a cable signal type for your
location.
7
The TV will begin memorizing all of the
available channels.
After all the available channels are
stored, the Auto program menu
reappears. Press the ENTER button at
any time to interrupt the memorization
process.
Pressthe ENTER button, then the menu
to set the clock mode is automatically
displayed.
Pressthe ENTER button to select "Clock
Mode".
Pressthe • or • button to select "Auto"
or "Manual", then press the ENTER
button.
Setsthe current time manually or automatically.
Clock Mode
Continued...
English- 29