Filter
Top Products
English
9
Menu Setting Procedures
When more than one camera is connected to the digital video recorder, the camera rate (unique rec rate
for each camera) can be set separately for each camera. In addition, you can make up to four programs
that include settings such as the method of combining the images from each recording camera and
individual camera rates. You can specify the appropriate program when making [TIMER SET] and
[RECORDING MODE SET] menu settings.
1
Use the menu (1
11
1) to specify a program number.
P-1 to P-4
2
Use the menu (2
22
2) to specify the cameras that are
to be used for recording from the numbers of the
connected cameras that are being displayed on the
screen (DSR-3009 model: 1-9; DSR-3016 model: 1-
16), and set the camera rate for each camera
selected.
• If a camera is not to be recorded: Select “OFF”.
• If a camera is to be recorded: Set the camera rate.
The camera rate values that appear in the menu lists
will vary depending on the number of channels
connected. The maximum value for REC RATE in
PROGRAM REC mode is 30 fps, so the values in the
table will be this maximum value divided by the
number of channels, and comprises the upper limit
for the setting.
3
Click [SAVE] to complete the setting.
When the setting is completed, the available time for normal
recording and the number of alarm recordings that are
possible under the conditions that have been set will be
displayed for reference (
3
).
4
You can repeat the above procedure to program up
to a maximum of four different patterns.
Screen example for DSR-3009 model
Screen example for DSR-3016 model
3. PROGRAM REC SET
Default setting DSR-3009 model: 0.556 FPS
DSR-3016 model: 0.313 FPS
1
2
3
1
2
3
L8HBA_US(DSR-3016 NETWORK)(GB only).book 9 ページ ２００３年３月２８日 金曜日 午後６時４４分