Filter
Top Products
26
English
Viewing Images
■
■■
■ Image Adjustment and Audio Playback
The display image can be adjusted and audio can be played back using the following adjustments.
Select the adjustment values from the menus, and then click [SET].
1
READ INTERVAL (Default setting: 1)
Five stages of image display speed can be selected.
The larger the setting value, the faster is the display speed.
However, the actual refresh speed is limited by the
communication speed of the network.
This setting is not available when AUDIO is set to ON.
2
SIZE (Default setting: 1)
The image size can be set to one of six sizes.
The larger the setting value, the larger is the display screen.
1: 320 × 240
2: 400 × 300
3: 640 × 480
4: 800 × 600
5: 1024 × 768
6: 1280 × 960
3
QUALITY (Default setting: 2)
The image quality can be set to one of three levels.
1:Lowest quality
2:Medium quality
3:Highest quality
4 AUDIO (Default setting: OFF)
This lets you set whether sound is played back or not at the
same time as images are displayed.
• OFF: Sound is not played back.
• ON-5SEC - 30SEC: Sound is played back
(The audio delay time is set at the
same time. If the network speed is
slow, set the audio delay time to a
longer period to prevent the sound
from dropping out.)
Live mode screen Playback mode screen
1
7
9
5 6
8
2
3
4
1
7
8
5 6
F
G
2
3
4
• The operating privileges must be set to a user
level of ID2 or higher for sound playback. If the
operating privileges are set to ID1, the sound
playback menu will not be displayed.
• In order to play back sound, install Active X on a
PC and set sound recording to "ON". (See p3, 12)
• Sound is given priority during playback, so the
images may not appear in some environments.
L8HBA_US(DSR-3016 NETWORK)(GB only).book 26 ページ ２００３年３月２８日 金曜日 午後６時４４分