18
English
Menu Setting Procedures
The duration of alarm recording can be set separately for each camera. The DURATION setting for each
camera that is made using the [ALARM DURATION SET] menu is effective when [DURATION] in the
[ALARM RECORDING] menu is set to “INDIV.” (See p. 16)
1
Select the alarm recording duration for each
camera from the menu.
5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN, 2 MIN, 3 MIN,
4 MIN, 5 MIN, 10 MIN, 15 MIN, CC
(Default setting: 5 SEC)
2
Click [SAVE] to set (or change) the alarm recording
durations for each camera.
Screen example for DSR-3009 model
Screen example for DSR-3016 model
This specifies the information to be displayed on the monitor by selecting “ON” or “OFF” in the menu.
DATE (Default setting: ON)
Current date or recording date
TIME (Default setting: ON)
Current time or recording time
QUALITY (Default setting: ON)
Quality of images being recorded or played back
AUDIO (Default setting: ON)
The audio recording display during recording and
playback.
ALARM COUNT (Default setting: ON)
Cumulative number of alarms
The maximum count that can be displayed is 9999. If the count
exceeds this number, it will be reset to 0.
ALARM TYPE (Default setting: ON)
Type of alarm recording
For alarm recording: “ALARM” is displayed.
For pre-alarm recording: “PRE” is displayed.
Click [SAVE] to complete the DISPLAY SET menu settings (or changes) that are displayed on the screen.
10. ALARM DURATION SET
11. DISPLAY SET
Because this setting specifies the information to be displayed on the monitor that is connected to the main unit, it will
have no effect on the computer screen.
L8HBA_US(DSR-3016 NETWORK)(GB only).book 18 ページ 2003年3月28日 金曜日 午後6時44分