Sanyo DSR-3016 DVR User Manual


 
42
English
DVR Viewer
Saving images
In the case of images on a CD-R, the control panel includes buttons that can be used for saving images, so that
images can be saved on another storage medium as described below. You can specify an existing folder to use or
create a new folder, and you can also set your own filenames for the files being saved.
1
Specify the start image and end image to be saved.
Click the [Set Copy Start image] button and then use
playback operations to select the start image. Then when
playback is stopped, click the [Set Copy Start image] button
again to set the starting point for the images to be copied
using the image numbers.
Specify the copy end point in the same way.
2
Click the [Start Copy] button.
The Save As dialog box appears.
3
Specify the saving destination and the filename,
and then click [Save].
The specified images will then be saved.
The filenames for each image will be generated automatically
based on the number of images being copied and the
filename you entered.
Example:If the number of images copied is "100" and the
filename is "SAMPLE":
Copy start
point
[Start Copy]
button
Copy end point
SAMPLE000.JPG
SAMPLE001.JPG
SAMPLE099.JPG
L8HBA_US(DSR-3016 NETWORK)(GB only).book 42 ページ 2003年3月28日 金曜日 午後6時44分