Filter
Top Products
32
English
Saving Recorded Images and Sound
Recorded images can be copied into the archive area of the hard disk or downloaded to a personal
computer.
This function is used only for saving important images that have been recorded in the normal recording
area and alarm recording area.
■
■■
■ COPY TO ARCHIVE AREA ON THE RECORDER
1
Play back the recorded images from the normal
recording area or alarm recording area, and pause
playback at the first image that is to be copied.
2
While playback is paused, click the M button on
the operating panel.
The COPY screen will be displayed.
3
Enter the number of images in the [HOW MANY]
box.
Enter the number of successive images to be copied after the
start image.
Valid range: 1 to 10000.
A warning message will be displayed if an invalid number is
entered.
4
Click the [START] button.
Copying to the archive area will begin and copying progress
will be displayed in the message box.
Copying in progress: COPYING TO ARCHIVE AREA !
Copying finished: COPY FINISHED !
1
Recording date and time: The date and time that the
images were recorded.
2
PLAYBACK AREA:
The recording area where the images being played back were
recorded.
• NORMAL
• ALARM
3
HOW MANY: The number of images being copied.
4
MESSAGE BOX: Shows the copying progress.
5
START: Click this button to start copying.
• Images that are copied will be saved as individual images. Moving pictures are handled by specifying the number of
images that need to be copied after the start picture. The maximum number of images that can be archived in one copy
operation is 10,000 when copying to the archive area and 1,000 when downloading to a computer.
• In order to protect the recording operation of the digital video recorder, the status of the network is checked, and if the
network is busy, the digital video recorder may be disconnected from the network depending on the operating
environment. If a command is given to transfer large volumes of data all at once (particularly when saving 100 or more
images at a time), the digital video recorder may be disconnected from the network, so you may need to restrict the
number of images being copied at one time depending on the environment.
• If the archive area becomes filled with images, you can temporarily copy the images to another medium such as a
CompactFlash card, and then press the [AREA FULL RESET] button on the RECORDING AREA SET main menu to reset
the digital video recorder. (See p. 10)
3
4
1
2
5
L8HBA_US(DSR-3016 NETWORK)(GB only).book 32 ページ ２００３年３月２８日 金曜日 午後６時４４分