14
English
Menu Setting Procedures
This lets you set the conditions for timer recording, such as the timer operating time, separately for each
day of the week.
1
Select the timer recording conditions for each weekday from the menu.
2
Click [SAVE] to complete the timer settings (or changes).
1 WEEK
Specifies the weekdays for making timer recordings. Several
timer recordings can also be made at different times on the
same weekday by changing the setting row.
2 START
Enter the time for timer recording to start.
3 STOP
Enter the time for timer recording to stop.
4 PROGRAM (Default setting: OFF)
Specify the program to use for recording images. (See p. 9)
5 FPS (Default setting: A30 FPS)
Set the recording rate (See p. 13)
6 SET (Default setting: OFF)
Set this to “ON” if timer recording is to be carried out.
Set this to “OFF” if timer recording is not to be carried out.
7 DLY
Enter the start and stop times, image recording program and
the recording rate and change SET to “ON” to enable timer
recording at the same time each day.
The DLY setting conditions take precedence over the setting
conditions that have been made separately for each day.
7. TIMER SET
1 2 3 4 5 6
7
The [TIMER SET] menu is for setting the conditions for timer recording. To actually carry out timer recording based on
these setting conditions, you will need to click the [TIMER] button on the operating panel. (See p. 6 and 22.)
When the digital video recorder switches to timer recording standby mode and the setting time is reached, timer
recording will start automatically.
The timer recording operation is indicated by a “TIMER STANDBY” or “TIMER RECORDING” message appearing on the
screen.
Points to note and applications of timer settings
• If timer reservations overlap, the earlier time setting will take precedence for recording.
• If you wish to set the timer to continue for more than 24 hours, use the bottom two lines on the setting screen to make this setting.
1. Switch the setting format by clicking the [OVER 24H] button.
2. Use the top line to set the start day and time.
3. Use the bottom line to specify the stop day and the time and recording cycle.
4. When [SET] in the bottom line is set to [ON], timer recording for more than 24 hours will be set.
L8HBA_US(DSR-3016 NETWORK)(GB only).book 14 ページ 2003年3月28日 金曜日 午後6時44分