Filter
Top Products
27
2 REC MODE SET
[Settings] ( indicates initial setting.)
* When item (3) “OVER WRITE” is set to “OFF” and the hard disk becomes full, the digital video recorder performs the
operation set by item (4) “DISK FULL RESET”. For how to start recording again, see “Starting recording again when the
FULL indicator lights” on page 28.
<REC MODE SET> setting items
<MAIN MENU>
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Item Setting Description
(1)
PICTURE
QUALITY
SUPER
Highest image quality. Recording time: 84 hours or more (120 GB). 168 hours or more (240 GB).
HIGH
High image quality. Recording time: 168 hours or more (120 GB). 336 hours or more (240 GB).
STANDARD
Standard image quality. Recording time: 336 hours or more (120 GB). 672 hours or more (240 GB).
(2)
AUDIO
RECORDING
ON Audio recording input
OFF No audio recording input
(3) OVER WRITE
ON
When the hard disk runs out of space, recording automatically starts again from the
beginning, recording over previously recorded images.
OFF* When the hard disk runs out of space, FULL indicator flashes and recording stops.
(4)
DISK FULL
RESET
NO
Images are not recorded over previously recorded images.
The <WARNING> screen appears, and “NO” flashes.
YES
Images can be recorded over previously recorded images once.
The <WARNING> screen appears. Press the [ ] or [ ] button to select “YES”.
(5) ALARM MODE
OFF No alarm recording
ENABLED Alarm recording is always performed, during timer recording or other recording.
AL-REC ON
TIMER
Alarm recording is only performed during timer recording.
AL-REC OFF
TIMER
Alarm recording is performed only during recording types other than timer recording.
OLY AL-RC
ON TMR
Alarm recording is performed only during timer recording. Normal recording is not performed.
(6)
ALARM
DURATION
Time selections: CC/5S/10S/20S()/40S/1M/2M/3M/4M/5M/10M/15M
Sets the amount of time for recording when a single alarm is received.
(7) VIDEO LOSS
ON
“VIDEO LOSS” is displayed on the screen when the camera image is interrupted. The
WARNING SIGNAL is also output to a rear panel terminal.
OFF “VIDEO LOSS” is not displayed on the screen when the camera image is interrupted.
e_dsr_m800.book Page 27 Friday, January 31, 2003 5:45 PM