Filter
Top Products
30
3 TIMER REC SET
INTRODUCTION OPERATION SETTINGS OTHER OTHER OTHER OTHER
5 Press the [ ] button to move the
cursor to the next item.
Each time you press the [ ] button, the cursor moves to
the following items:
Day J “START” time (hours, minutes) J “STOP” time
(hours, minutes) J “ON”/”OFF”.
To change a displayed setting item
Press the [ ] or [ ] button to move the flashing
area to the item you want to change, then press the [ ]
or [ ] button to change the setting.
Timer recording image quality
The image quality used for recording is set by “PICTURE
QUALITY” in the <REC MODE SET> sub-menu screen.
(JP.27)
6 When finished making the settings,
press the [EXIT/OSD] button.
The display returns to the normal screen.
To set different recording times on each day of
the week
Set the desired recording times for each day.
If timer reservation days overlap
The timer reservation that starts first will have priority.
1 With the <TIMER REC SET> screen
displayed, press the [MENU RESET]
button.
All the timer settings are erased.
This section describes how to use timer reservations to
record for more than 24 hours. These settings are made
using lines 7 (initially “SAT”) and 8 (initially “DLY”) of the
<TIMER REC SET> screen.
Example:
Timer recording from 10:30 AM Monday to 8:30
PM Wednesday
1 Press the [ ] or [ ] button to move
the cursor to the 7th line, then press the
[ ] button.
“SAT” in the “WEEK” column flashes.
You can change the setting of the flashing item.
2 Set the items in the “WEEK” and
“START” columns.
(1) Press the [ ] or [ ] button to change “SAT” to
“MON”, then press the [ ] button.
(2) Press the [ ] or [ ] button to change “--” to “10”,
then press the [ ] button.
(3) Press the [ ] or [ ] button to change “--” to “30”,
then press the [ ] button.
To cancel all timer reservations
[ ] button
[ ] button
SEARCH
MENU RESET
MENU
REVIEW
CUE
EXIT/OSD
PLAY/
STOP
STILL
[MENU RESET] button
Timer reservations spanning more
than 24 hours
7th line
e_dsr_m800.book Page 30 Friday, January 31, 2003 5:45 PM