Filter
Top Products
40
INTRODUCTION OPERATION SETTINGS OTHER OTHER OTHER OTHER
8 MENU UPLOAD/DOWNLOAD
You can save menu setting values onto a CompactFlash
card. This sub-menu also lets you read menu setting values
saved on CompactFlash cards.
z If “COPY MIRRORING SETTINGS” is set to “YES”, the
hard disk may be initialized. If you don't want to initialize
the hard disk, select “NO”.
z
Do not turn the power OFF when saving/loading menu
items to/from a CompactFlash card.
z
Confirm that the light on the CompactFlash card reader is
lit before using the card reader with the USB terminal. If
used before the light is lit, SAVE and LOAD may not be
recognized.
z
When the menu cannot be saved to the CompactFlash
card consecutively, remove the CompactFlash card,
reinsert and try again.
z At least 2 KB of available memory space is needed on
the CompactFlash card.
z
The file name is “M800MENU.txt”.
You will need a CompactFlash card reader and
CompactFlash card (commercially available).
1 Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU> screen
appears.
2 Select “8. MENU UPLOAD/
DOWNLOAD”, and press the [ ]
button.
The <MENU UPLOAD/DOWNLOAD> screen appears.
The cursor is positioned on “SAVE MENUS TO CF”.
The following two procedures describe the “SAVE MENUS
TO CF” and “LOAD MENUS FROM CF” items.
ALARM
REC/STOP
LOCK/REMOTE
USB
POWER
SEARCH
MENU RESET
MENU
REVIEW
CUE
EXIT/OSD
PLAY/
STOP
STILL
TIMER
FULL
LAN
(LINK/ACT.)
<MAIN MENU>
[ ] button
[MENU] button [ ] button
[ ] button [EXIT/OSD] button
[ ] button
CompactFlash
card reader
CompactFlash
card
Settings
e_dsr_m800.book Page 40 Friday, January 31, 2003 5:45 PM