Sanyo DSR-M800 DVR User Manual


 
39
7 POWER FAILURE/USED TIME
You can check the date/time of power failures and the
amount of hard disk operation time.
1 Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU> screen
appears.
2 Select “7. POWER FAILURE/USED
TIME”, and press the [ ] button.
The <POWER FAILURE> screen appears.
Use this screen to check the date/time of power failures and
the amount of hard disk operation time.
(1) FAILURE
Displays the date/time at which a power failure
occurred.
The number on the left is the number of power failures
(example: #020). Resets to “000” after exceeding
“999”.
(2) RECOVER
Displays the time at which the power was restored.
(3) DISK1 USE
Displays the total amount of disk 1 operation time.
(4) DISK2 USE
Displays the total amount of disk 2 operation time
(when second disk has been added).
(5) POWER
Displays the amount of power ON time for the digital
video recorder.
3 Press the [EXIT/OSD] button.
The display returns to the normal screen.
ALARM
REC/STOP
LOCK/REMOTE
USB
POWER
SEARCH
MENU RESET
MENU
REVIEW
CUE
EXIT/OSD
PLAY/
STOP
STILL
TIMER
FULL
LAN
(LINK/ACT.)
<MAIN MENU>
[ ] button[MENU] button [ ] button
[ ] button [EXIT/OSD] button
[ ] button
(1)
(2)
(3)
(4)
(5)
e_dsr_m800.book Page 39 Friday, January 31, 2003 5:45 PM