Filter
Top Products
5
35
SECURITY LOCK SET
3 Press the [ ] button.
The first password entry bar “-” flashes.
4 Press the [ ] and [ ] buttons to select
the character to enter.
Example:
Selecting “1”
5 Press the [ ] button.
The second password entry bar flashes.
6 Use the same procedure to enter the
remaining digits (“23456AB” in this
example).
z To set a 4-digit password
When you have entered four digits, and the fifth
password entry bar is flashing, press the [ ] button.
7 When you have entered the password,
press the [ ] button.
The cursor moves to “OFF” (flashing).
8 Press the [ ] and [ ] buttons to select
“ON”.
z If you select “OFF” for the “ADMIN” setting, you can’t
set the “USER” password.
9 When you have finished making the
setting, press the [ ] button.
The cursor moves to
“USER”.
If you don’t want to set a
user password, the
password setting is now
finished.
Press the [ ] button to move the cursor to “REC
CONTROL”, to set the authorization for recording and
playback operation. (JP.36)
Example: Setting “AB123456”
1 Press the [ ] and [ ] buttons to move
the cursor to “USER”.
2 Press the [ ] button.
The first password entry bar “-” flashes.
(Example: A)
Press the [ ] and [ ] buttons to select “A”.
3 Press the [ ] button.
The second password entry bar flashes.
Press the [ ] and [ ] buttons to select “B”.
Use the same procedure used to set the administrator
password to enter the remaining digits (“123456” in this
example).
Setting the user password
e_dsr_m800.book Page 35 Friday, January 31, 2003 5:45 PM