Filter
Top Products
Changing your projector’s aspect ratio for use
with your SMARTBoard 690 interactive
whiteboard
Before you align the projected image on your SMARTBoard 690 interactive whiteboard, you must
change the native aspect ratio on your SMARTUF75w projector to 16:9. You don’t need to perform
this step with any other model of interactive whiteboard. The procedure you use to change the native
aspect ratio depends on the DDP firmware version of your projector.
g To determine the DDP firmware version of your projector
1. Turn on your projector.
2. Press Menu on the remote control, and then press Right five times.
3. Record the DDP firmware version in the Firmware Version row.
g To change the aspect ratio of a projector with DDP firmware version 0.0.1.7
1. Using the remote control, press the following buttons quickly to access the service menu:
Down, Up, Up, Left, Up.
2. Scroll to WXGA_720P_MODE, and then press Right to select 16:9.
3. Press Menu on the remote control.
g To change the aspect ratio of a projector with DDP firmware version 0.0.2.1 or later
1. Press Menu on the remote control, and then press Right twice.
2. Scroll to Native DLP Resolution, and then press Right to select 16:9.
3. Press Menu on the remote control.
C HA PTER 2
Installing your interactive whiteboardsystem
10