Filter
Top Products
A P P E N D I X B
Remotelymanagingyour interactiveflatpanel
100 smarttech.com/kb/170446
N OT E
You must specify unique values for set ubs1source, set usb2source and set usb3source.
Video control
Use the following commands to identify video control settings.
Command Response Possible values Standby
mode
getambient ambient=[Value] 0–1023 No
getblacklevel blacklevel=[Value] l high
l low
No
getbrightness brightness=[Value] 0–100 No
getcolortemp colortemp=[Value] 0–100 No
getcontrast contrast=[Value] 0–100 No
getdisplaymode displaymode=[Value] l standard
l ambient
l vivid
l ISF_Expert1
l ISF_Expert2
No
getgamma gamma=[Value] l high
l medium
l low
l 1.9
l 2.2
l 2.4
No
gethsharpness hsharpness=[Value] 0–50 No
gethsize hsize=[Value] [Dependentonthe video
signal]
No
getphase phase=[Value] [Dependent onthevideo
signal]
No
getsaturation saturation=[Value] 0–100 No
getsharpness sharpness=[Value] 0–50 No
gettint tint=[Value] 0–100 No
getvsharpness vsharpness=[Value] 0–50 No
Use the following commands to assign video control settings.
Command Possible values Response Standby
mode
setambient[Value] =0–1023 ambient=[Value] No
setblacklevel[Value] l =high
l =low
blacklevel=[Value] No