Filter
Top Products
C H A P T E R 7
Troubleshootingyour interactiveflatpanel
59 smarttech.com/kb/170446
Symptom Causes Solution
The image is unstable or
unfocused.
The video connection is
loose.
Secure the video cable to both
your computer and your
interactive flat panel.
You have a poor quality
video cable.
1.
Replace your video cable with a
better quality video cable.
2.
Press AUTO SETUP (on
SMARTBoard 8070i-G4-SMP
interactive flat panels) or AUTO
(on SMARTBoard
8084i-G4-SMP interactive flat
panels) on the remote control.
You connected two video
cables together.
1.
Replace your two cables with one
longer cable.
OR
Move your computer so that it’s
within a single cable length of
your interactive flat panel.
2.
Press AUTO SETUP (on
SMARTBoard 8070i-G4-SMP
interactive flat panels) or AUTO
(on SMARTBoard
8084i-G4-SMP interactive flat
panels) on the remote control.
Your computer’s video
display card is defective.
Connect a different computer to
your interactive flat panel. If this
improves the image quality,
consider replacing the video card
in the original computer.
The image is too light, too
dark or has poor image
quality issues.
You might have incorrect
video settings.
Press AUTO SETUP (on
SMARTBoard 8070i-G4-SMP
interactive flat panels) or AUTO
(on SMARTBoard
8084i-G4-SMP interactive flat
panels) on the remote control.
There is a persistent image
on the screen.
An image was displayed for
too long.
l
Turn off your interactive flat panel
and leave it turned off for as long
as the image was on the screen.
l
Use a screen saver to avoid
persistent images.