Filter
Top Products
Chapter 6 Setup Operations
Chapter 6 Setup Operations 6-5
Top menu
item
Submenu items (nested
submenus in angle brackets)
Function Setting values
<SYSTEM 3>
<BANK> LOAD Select one of the bank numbers
then press the SET buttonto read
in the setup data from a memory
bank.
0: factory default setup data.
1: setup data from bank 1.
2: setup data from bank 2.
3: setup data from bank 3.
SAVE Select a bank number, then press
the SET button to save the
current setup data in a memory
bank.
1: save in bank 1.
2: save in bank 2.
3: save in bank 3.
Setup menu settings (Continued)
ISR Select whether to use REMOTE
connector for ISR (Interactive
Status Reporting).
OFF: no ISR; use as Sony 9-pin
protocol interface.
ON: use as ISR interface.
Set data transmission speed in
ISR mode.
19200, 9600, 4800, 2400 or 1200 bps
SPEED
Return to <SYSTEM 3> menu. —
EXIT
<TRACKING> AUTO TR Select whether to carry out outo
tracking.
OFF: no auto tracking
ONE: auto tracking once, when tape is
loaded
ON: continual auto tracking
Select whether to activate the
auto equalizer.
AUTO EQ OFF: no auto equalizer
ON: activate auto equalizer
<ISR>
EXIT Return to <SYSTEM 3> menu. —
EXIT Return to top menu. —