Filter
Top Products
16
Overview
Overview of the Remote Control Buttons
Buttons
Description
a To Temporarily
Switch Off TV:
Press this button to temporarily switch off the TV
(the (power on/standby) indicators on the
display unit and the media receiver unit light up in
red). Press again to switch on the TV from standby
mode.
To save energy we recommend switching the TV
off completely when the TV is not in use.
After a certain period without a signal and
without any button being pressed, the TV
automatically switches into standby mode
(Auto Shutoff, page 41).
b VCR or DVD on/
off:
Press this button to switch your VCR or DVD on
or off.
c Selecting input
source:
Press this button repeatedly until the desired input
symbol of the source appears on the TV screen.
d Displaying the
Memory Stick
Home (“Memory
Stick” picture
viewer):
Press this button to display the Memory Stick
Home (“Memory Stick” picture viewer). For more
details, refer to “Using the Memory Stick Home”
on page 50.
e Selecting
channels:
Press this button to select channels.
For double-digit programme numbers, enter the
second digit within 2.5 seconds.
Buttons
Description
f a) If the Media Selector is
switched to TV:
Press this button to watch the last channel selected (the last channel
watched for at least 5 seconds).
b) If the Media Selector is
switched to VCR:
For Sony’s VCR double-digit programme numbers, e.g. 23, press
-/- - first and then the buttons 2 and 3.
g a) If the Media Selector is
switched to VCR or DVD:
Press this button to record programmes.
b) If the Media Selector is
switched to TV:
Press this button to return the picture and sound to the factory preset levels.
This will also return the set to the install condition.
h Switching off the picture: Press this button to switch off the picture. Only the picture is switched off;
the sound remains on. Press again to cancel.
i Displaying the clock: Press this button to display the clock on the TV screen. Press again to turns
the clock display off.
The clock display turns off automatically 5 minutes after it is
turned on.
jThis button works in Teletext mode and is also used for programming the remote control to operate
the VCR and DVD.
OK
PROG
MENU
TV
VIDEO