Filter
Top Products
34
Menu System
Phase The “Phase” option adjusts the phase of sound when using the TV’s
speakers as the centre speaker. If sound from the TV’s speaker (as centre
speaker) sound unnatural, adjust the “Phase” option.
To do this:
1 After selecting the option, press
.
2 Press or to select Reverse. Sound from the TV’s speakers is
phase-reversed.
Phase can be adjusted only when the “Speaker” option, “Centre in”, is selected.
vb
Audio Output The “Audio Output” option allows you to select either the TV’s remote
control or the external amplifiers remote control to control the volume of
the TV’s speakers when an external amplifier is connected to the TV’s
audio output sockets.
To do this:
1 After selecting the option, press
.
2 Press or to select Variable (if you wish to use the TV’s remote
control) or Fix (if you wish to use the external amplifier’s remote
control).
• When you connect the AV mouse and install it on the external amplifier, you can use
the external amplifier’s remote control, pointed toward the TV, for controlling the
external amplifier’s volume level. For more details on AV mouse installation, refer to
“Connecting Optional Equipment” on page 59.
• Audio Output cannot be adjusted when “Centre in” is selected in the “Speaker” option.
AV3 Output/
AV4 Output
The “AV3 Output” and “AV4 Output” options allow you to select the
source to be output from the Scart connectors 3/ and 4/ .
You can record from these Scarts any signal coming from the TV or from
external equipment connected to the other Scart connectors.
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
1 After selecting the option, press .
2 Press or to select the desired output signal: Auto, TV, AV1,
AV2, AV3 (only for AV4 Output), AV4 (only for AV3 Output) or
AV6.
• If you select Auto, the output signal will always be the same
one that is displayed on the screen.
• If you have connected a decoder to the Scart connectors 3/
or 4/ , or to a VCR connected to this Scart, please
remember to change back to AV3 Output or AV4 Output to
Auto for correct unscrambling.
•When AV3 Output or AV4 Output is set to Auto, the signals
input through the AV5 input, PC input and “Memory
Stick” input are not output from Scart connectors 3/
or 4/ .
S
S
S