Filter
Top Products
24
First TIme Operation
4 The Country menu appears automatically on the TV
screen.
Press or to select the country in which you will
operate the TV set, then press OK to confirm your
selection.
• If the country in which you want to use the TVset
does not appear in the list, select “Off ” instead of a
country.
• If you change the country selection, Clock Set
should always be performed next.
5 The Clock Set menu appears on the TV screen.
a)Press or to set the hour, then press .
b)Press or to set the minutes, then press .
c)Press or to set the day of a week, then press OK
at the time signal.
The clock starts.
If you adjust the clock, Auto Tuning should always be
performed next.
6 The Auto Tuning menu appears on the screen.
Press OK to select Yes.
7 The TV automatically starts searching and storing all
available broadcast channels for you.
This procedure could take some minutes. Please be
patient and do not press any buttons, otherwise
automatic tuning will not be completed.
If no channels are found during the auto tuning
process, a new menu appears automatically on the
screen asking you to connect the aerial. Please connect
the aerial (see page 22) and press OK. The auto tuning
process will start again.
After all available channels are captured and stored,
the Programme Sorting menu appears automatically
on the screen enabling you to change the order in
which the channels appear on the screen.
OK
Country
Select country
Off
United Kingdom
Ireland
Nederland
België/Belgique
Luxembourg
France
Italia
Schweiz/Suisse/Svizzera
Deutschland
Österreich
OK
Clock Set
0 0 : 0 0 : 0 0 Mon
OK
Do you want to start
automatic tuning ?
Ye s No
OK
Auto Tuning
Programme :
System :
Channel :
Searching...
01
I
C23
No channel found.
Please connect aerial
Confirm