Filter
Top Products
41
Menu System
GB
On/Off Timer The “On/Off Timer” option allows you to turn the TV on and off
automatically at a specified time automatically. To use this function, set
the clock in advance (page 40).
• If you change the following settings, Off is selected automatically
in the Timer option. In this case, select On in the Timer option.
– Unplugging the mains lead of the media receiver unit
– On Time, Holding Time, Weekly Setting, Repeat, Programme
option settings
To do this:
1 After selecting the option, press
.
2 Highlight Timer and press
or to select On, then press .
3 Press or
to select On Time, then press .
4 Set the time for the TV to turn on itself automatically. Press or
to set the hour, then press . Next press or
to set the minutes,
then press .
5 Press or
to select Holding Time, then press .
6 Press or
to select the desired Holding Time. Select the holding
time (max. of 5 hours) for the TV to switch itself automatically into the
standby mode.
7 Press or
to select Weekly Setting, then press .
8 Press or
to select the day of the week you wish to set for On/
Off Timer, then press
.
9 Press or
to select On, then press .
10 Repeat steps 8 and 9 to set any other days of a week.
11 Press or
to select Programme, then press .
12 Press or
to select the channels (TV Broadcast) that you want
to watch at the time of turning on the TV, then press .
To turn the TV on and off at a specified time everyday, set Repeat
to On after step 2, then go to step 3.
To cancel this function afterwards, select Off instead of On in step 2
above.
Auto Shutoff The “Auto Shutoff” option allows you to set the TV to change to the
standby mode automatically if there is no input signal through the
connected equipment.
To do this:
1 After selecting the option, press .
2 Press or to select On.
Auto Shutoff cannot be set when the TV receives the TV Broadcast signal.