Filter
Top Products
70
Additional Information
Distorted picture and noisy sound. • Check if any connected optional equipment is installed in
front of the TV or at the side of the TV. When installing
optional equipment, leave some space between the optional
equipment and TV.
Stripe noise during playback/recording of
a VCR.
• Video head interference. Keep your VCR away from the TV.
• Leave a space of 30 cm between your VCR and the display
unit to avoid noise.
• Avoid installing your VCR in front of the display unit or at
the side of the display unit.
Poor or no picture (screen is dark), but
good sound.
• Using the menu system, select the “Picture Adjustment”
menu and select “Reset” to return to the factory settings
(page 27).
• If the PICTURE OFF indicator lights up in blue, press
(picture off) on the remote control.
Noisy picture when viewing a TV
channel.
• Using the menu system, select the “Manual Programme
Preset” option in the “Set Up” menu and adjust Fine Tuning
(AFT) to obtain better picture reception (page 39).
• Using the menu system, set the “NR” (Noise Reduction)
option in the “Picture Adjustment” menu to reduce the noise
in the picture (page 27).
Distorted picture when changing
programmes or selecting teletext.
• Turn off any equipment connected to the Scart connector on
the rear of the media receiver unit.
Wrong characters appear when viewing
teletext.
• Using the menu system, enter the “Language/Country”
option in the “Set Up” menu and select the country in which
you operate the TV set (page 36). For Cyrillic languages, we
recommend that you select Russia in case your own country
does not appear in the list.
Wrong characters appear when viewing
NexTView.
• Using the menu system, enter the “Language/Country”
option in the “Setup” menu and select the country as the
NexTView is broadcasted (page 36).
No sound/Noisy sound.
Good picture, no sound. • Press the 2 +/– or % (mute) on the remote control.
• Check that “Speaker” option is set to “Main” in the
“Features” menu (page 33).
• If headphones are connected, select the “
i Speaker Link”
option in the “Sound adjustment” menu to “Off,” or
disconnect the headphones.
Audio noise. • Make sure that the aerial is connected using the supplied
coaxial cable.
• Keep the aerial cable away from other connecting cords.
• Do not use 300-ohm twin lead cables as interference may
occur.
The TV fan noise becomes bigger. • The ventilation holes can accumulate dust over a period of
time. the accumulated dust may make the cooling function of
the built-in fan less effective. To prevent this, we recommend
removing the dust periodically (once a month) using a
vacuum cleaner.
Cannot operate the menu.
• If the item you want to select appears in a pale colour, you
cannot select it.
Problem Possible remedies