Filter
Top Products
– 52 –
38
Additional Operations
Adjusting the TV (continued)
Adjusting the color system
Normally set the color system to AUTO. However, when the picture
has no color, manually select the appropriate color system for your
area.
1
Press MENU.
2
Press M or m to select
, then press ENTER.
3
Make sure TV SET UP is selected, then press ENTER.
4
Press M or m to select COL SYS, then press ENTER.
5
Press M or m until the
appropriate color system
appears, then press
ENTER.
To return to the normal screen
Press MENU.
PLAY
ENTER
H
PLAY
ENTER
H
SELECT
TV SET UP
AUTO PROGRAM
MANUAL PROGRAM
SKIP : PR 01 OFF
TV SYS : D/K
COL SYS : PAL
INTELLIGENT VOL : OFF
3
ENTER
39
Additional Operations
Changing the PICTURE MODE setting
The PICTURE MODE menu allows you to adjust the picture quality.
1
Press MENU.
2
Press M or m to select
,
then press ENTER.
3
Press M or m to select
ADJUST , then press
ENTER.
4
Press M or m to select the desired item, then press ENTER.
The adjustment bar for the selected item appears at the bottom of
the screen.
5
Adjust the value according to the following table, then press
ENTER.
For Press m to Press M to
PICTURE decrease picture contrast increase picture contrast
COLOR decrease color intensity increase color intensity
BRIGHT darken the picture brighten the picture
HUE* increase red picture tones increase green picture tones
SHARP soften the picture sharpen the picture
*You can adjust HUE for the NTSC color system only.
To return to the normal screen
Press MENU.
SELECT
PICTURE MODE
·
DYNAMIC
·
STANDARD
·
SOFT
·
PERSONAL
ADJUST
3
ENTER
SELECT
PERSONAL ADJUST
PICTURE
COLOR
BLIGHT
HUE
SHARP
3
ENTER
80
50
50
00
50
PLAY
ENTER
H
PLAY
ENTER
H
PLAY
ENTER
H
PLAY
ENTER
H
continued