Filter
Top Products
1-4
PFM-42B1, PFM-42B1E
6
(GB)
Features
Features
The PFM-42B1/42B1E series are 16:9 42-inch flat
panel monitors utilizing a PDP (Plasma Display
Panel), which can accept various types of signals with
the built-in scan converter.
Improved image quality
The PFM-42B1/42B1E series achieves higher image
quality with its PDP (Plasma Display Panel) set to
1024 dots × 1024 lines. This makes for a finely-
detailed HDTV or PC image.
Internal high-performance scan converter
The monitor has a high performance scan converter.
Using a unique algorithm, the monitor processes
signals in a wide range of formats
— Video, HDTV,
PC, etc.
Flexibility
An option slot is in place for future expansion.
The slot-in optional adaptor allows for quick and easy
system upgrades.
Other features
•Three sets of video inputs with audio input: one
composite video or Y/C input and two RGB/
component inputs. (For the PFM-42B1E, the BKM-
B10 video input adaptor is required to input the
composite video and Y/C signals.)
•Displays the HDTV signal with a tri-level sync
signal.
•Three dimensional comb filter for NTSC Y/C
separation.
•Line correlation comb filter for PAL Y/C separation.
•Automatic input signal detection with on-screen
indication.
•Windows
1)
95/98 PnP (Plug and Play) compatible.
•Picture AGC function
— this function automatically
adjusts and improves the contrast when a low
intensity signal is input.
•On-screen menu for various adjustments and settings
•On-screen display in six languages for user-friendly
access. (Languages: English, German, French,
Italian, Spanish and Japanese)
•Fine adjustment of image size and position
•Memory function for storage of up to twenty picture
settings.
•ID control
•Self-diagnosis function
•Remote (RS-232C) connector (D-sub 9-pin)
•Accepts infrared Sony Remote Commanders using
SIRCS code.
•Vertical setup
•Closed caption decoder
•Screen saver to reduce afterimage or ghosting.
Warning on power connection
Use the proper power cord for your local power supply.
United States, Continental United Kingdom, Ireland, Japan
Canada Europe Australia, New Zealand
Plug type VM0233 COX-07 636 —
a)
VM1296
Female end VM0089 COX-02 VM0310B VM0303B VM1313
Cord type SVT H05VV-F CEE (13) 53rd (O.C) HVCTF
Minimum cord set rating 10A/125V 10A/250V 10A/250V 10A/125V
Safety approval UL/CSA VDE VDE DENTORI
a) Note: Use an appropriate rating plug which is applied to local regulations.
...............................................................................................................................
..........................................................................
1) Windows is a registered trademark of the Microsoft Corporation (U.S.A. and other countries).
7
(GB)
Location and Function of Parts and Controls
Location and Function
of Parts and Controls
Front / Rear / Right Side
Front
Right side
Rear
1 1 (standby) switch / indicator section
For details on the 1 (standby) switch / indicator section,
see “1 (standby) Switch / Indicator Section” on page 8
(GB).
2 Control button section
For details on the control button section, see
“Control
Button Section (Rear)
” on page 8 (GB).
3 Carrying handles
4 -AC IN socket
Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the STANDBY indicator lights up in red and the
monitor turns to the standby mode.
5 Stand installation hooks
Use these hooks to install the stand (not supplied).
6 Connector panel
For details on the connector panel, see
“Connector Panel
”
on page 9 (GB).
1
3524
6
The shaded areas shown in the illustration above are all
ventilation holes.