Filter
Top Products
1-17
PFM-42B1, PFM-42B1E
32
(GB)
To set the change to the standby mode at the
END TIME
1
After selecting AUTO for PIC INVERSION
mode, select POWER OFF and press ENTER.
The following menu appears on the monitor
screen.
ENTER
MENU
PIC INVERSION : AUTO
POWER OFF : NO
SELECT SET END
2
Select YES with
v
/
V
and press MENU.
The monitor changes to standby mode at the
designated END TIME.
Notes
•The power off function, power saving function and
on/off timer function in the POWER CONTROL
menu cannot be used simultaneously. When one of
those functions is set to ON (YES),
“– – – –” appears
next to the others and their functions are not
available.
•If you set START TIME and END TIME to the same
time, the setting of START TIME takes priority over
that of END TIME. The display does not return to
the original display at the END TIME.
Changing the Display Position
Automatically
1
In the SCREEN SAVER menu, press
v
/
V
to
move the cursor (B) to “PIC ORBITING” and
press ENTER.
The following menu appears on the monitor
screen.
ENTER
MENU
PIC ORBITING
ORBITING : OFF
ORBIT RANGE : 5dot
ORBIT CYCLE : 10sec
SELECT SET END
Reducing Afterimage/Ghosting (Screen Saver Function)
When you select AUTO, the following menu
appears.
ENTER
MENU
PIC INVERSION : AUTO
START TIME : 16:30
END TIME : 16:45
POWER OFF : NO
SELECT ADJUST END
(1) Press ENTER.
The cursor (B) appears on the monitor screen.
(2) Press
v
/
V
to move the cursor (B) to
“START TIME” and press ENTER.
The following menu appears and the
background of the hour is displayed in cyan.
ENTER
MENU
PIC INVERSION : AUTO
START TIME : 16:30
SELECT SET END
(3) Set the hour when the image is to be reversed
with
v
/
V
and press ENTER.
The setting for the hour is entered and the
background of the minute is displayed in cyan.
(4) Set the minute with
v
/
V
and press MENU.
The setting for the minute is entered and the
menu returns to the PIC INVERSION menu.
(5) Similarly, set the time when the PIC
INVERSION function is to be cancelled.
The display will be reversed at the START
TIME and will return to the original display at
the END TIME. This cycle is carried out
automatically once a day.
33
(GB)
Controlling Power On/Off
Automatically (Power
Control Function)
This monitor has two power controlling functions.
You can set it to turn off the power automatically after
a certain period if there is no input signal from the
INPUT1 or INPUT2 connectors (POWER SAVING
function). You can set the time when the power
automatically turns on/off (ON/OFF TIMER
function).
Power Saving Function
1
Press MENU.
The main menu appears on the monitor screen.
ENTER
MENU
MAIN MENU
INPUT SELECT
PIC CONTROL
PIC SIZE
CONFIG
MEMORY
REMOTE
STATUS
SELECT SET END
2
Press
v
/
V
to move the cursor (B) to “CONFIG”
and press ENTER.
The CONFIG (1/2) menu appears on the monitor
screen.
ENTER
MENU
CONFIG(1/2)
DISPLAY : ON
W-VGA : OFF
CLOSED CAPTION: OFF
COLOR SYSTEM : AUTO
SCREEN FILL :CENTER
POWER CONTROL
SCREEN SAVER
SELECT SET END
Reducing Afterimage/Ghosting (Screen Saver Function) / Controlling Power On/Off Automatically (Power Control Function)
2
Press
v
/
V
to move the cursor (B) to
“ORBITING” and press ENTER.
The following menu appears on the monitor
screen.
ORBITING : OFF
3
Select the ORBITING mode with
v
/
V
.
OFF: Cancel the PIC ORBITING function.
ON: Set the PIC ORBITING function.
4
Press MENU.
The menu returns to the PIC ORBITING menu.
5
Select ORBIT RANGE (moving distance) or
ORBIT CYCLE (time) with
v
/
V
and press
ENTER.
The following values can be selected:
ORBIT RANGE: 5dot, 10dot, 15dot, 20dot
ORBIT CYCLE: 10sec, 30sec, 1min, 5min
The following menu appears on the monitor
screen. (The illustration below is for selecting
ORBIT RANGE.)
ORBIT RANGE : 5dot
6
Adjust the ORBIT RANGE or ORBIT CYCLE
with
v
/
V
and press MENU.
When both PIC INVERSION and PIC
ORBITING are set to ON
If the PIC ORBITING function is actuated while the
picture is reversed, the reversed picture is displayed
changing position.