Filter
Top Products
Connections
Connection to a TV (Cont’d)
Connection to a Cable Box or Satellite Box
Note to the Cable TV System Installer:
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding–in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
This connection allows you to view or record a scrambled channel. With this connection, channels cannot be changed on
this unit. You can view or record ONLY the channels you have selected on the cable box or the satellite box.
• Read the instruction manual of the cable box or the satellite box also.
After you have completed connections
Turn your TV to the appropriate external input channel (usually near channel 0) in order to view the pictures output
from this unit on the TV. To find the external input channel press the channel button on your TV’s remote repeatedly until
the picture appears. External input channels may vary depending on the connection you made. Check your TV owner’s
manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV / VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands (Example)
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV / VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV / GAME
00
AUDIO IN
L
R
OUT
IN
ANTENNA
E
O IN
RF cable
(supplied)
(Back of this unit)
IN
OUT
E
(Back of TV)
Cable TV signal
(Cable box or
Satellite box)
17
Connections
EN
Connections
DVR
DVD Others
Before You Start
E41A1CD(16-25).qx3 06.3.3 10:02 AM Page 17