Filter
Top Products
5
When OTR ends,the unit will turn off automatically
except under conditions listed below.
- If a Timer Recording is programmed to start in 5
minutes.
- During playback of DVR.
- While displaying menus or information on the
screen.
- When DVD mode is selected.
• To cancel the OTR in progress,press STOP C.
One Touch Recording (OTR)
This is a simple way to set the recording time in blocks of
30 minutes.
Press
DVR first.
Preparing for OTR:
• Check that the DVR has enough recordable space for
the time you set.
1
Turn on the TV. Select the appropriate external input
channel. (See page
17.)
2
Using CHANNEL / or the Number
Buttons
, select a desired channel to record.
3
Press REC / OTR.
Recording will start.
4
Press REC / OTR repeatedly to change the recording
time.
The recording time will be extended by 30 minutes
every time you press
REC / OTR.
•
The maximum recording time is 8 hours.
• With OTR, the recording time that exceeds the
remaining time will not be displayed.
• To change the recording time during the
One Touch Recording, Press
REC / OTR
repeatedly.
0:30
(Normal Recording)
8:00 7:30
1:00
I
DVR Rec 0:06:50 CH8
OTR (0:30)20:56
I
DVR Rec 0:06:50 CH8
20:56
DVRDVRDVR
Note
• The remaining recording time will be displayed on the
Front Panel Display during a One Touch Recording.
Press
DISPLAY to see it on the TV screen.
• You cannot pause a One Touch Recording.
• When a power failure occurs, the unit will turn off
automatically in DVR mode.
27
DVR (Recording)
EN
Connections
DVR
DVD
Others
Before You Start
E41A1CD(26-35).qx3 06.3.2 11:24 AM Page 27