Filter
Top Products
87
Others
EN
Connections
DVR
DVD
Others
Before You Start
Symptom Solution
P
O
W
E
R
The power does not turn on. • Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
The unit turns on automatically without
any operation.
• The unit turns on automatically 3 minutes before the Timer
Recording.
The power turns off automatically . • The power turns off automatically when abnormality is
detected on the disc. Press POWER or OPEN / CLOSE A
to open the disc tray, and before it is opened completely, press
the button again. Then take out the disc.
• The power turns off automatically when an OTR is completed.
The OSD Language Setting Menu appears
every time the power turns on.
• Finish up the Language Setting procedure by selecting a
language in the OSD Language Setting Menu. Press ENTER to
activate the setting.
Symptom Solution
G
E
N
E
R
A
L
The unit does not function. • or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted
Clock Setting and Channel Setting cannot
be performed.
• If a Timer Recording is in standby or if a recording is in
progress, these operations cannot be performed. Delete timer
programs or stop the recording.
No picture, sound or menu appears on
the screen.
• Check if the connections are made securely and correctly.
• Check if the cables are not damaged.
• Check if a correct external input channel is selected on your
TV. (See page 17.)
• Check if you have completed the Channel Setting.
No picture or menu appears on the
screen in the DVR mode.
• COMPONENT VIDEO OUT connection is not available in the
DVR mode. Use other connection such as VIDEO OUT or
S-VIDEO OUT.
The unit does not operate properly. • Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on until the moisture evaporates.
(See page 4.)
Troubleshooting (Cont’d)
E41A1CD(56-96).qx3 06.3.2 11:55 AM Page 87